Skip to content
The Bonsai Art

Buying guide · 3 min

Bonsai starter kit by budget

What to buy with about €50, €150 or €300, in what order and what can wait. Quality over quantity.

Getting into bonsai does not require spending a lot, but it does require spending well. This guide suggests three rough budgets and explains what to buy at each level, in what order and what you can expect. Amounts are approximate and vary by shop and over time.

Before you buy anything

  • The tree first. Choose a beginner species suited to your climate. If you do not have one yet, start with the beginner route.
  • Quality over quantity. Two good tools do more than a fifteen-piece kit of soft steel.
  • Do not buy for five years from now. Buy what you will use this season.

About €50: the essentials

To look after a first tree well through its first year.

What What for
Bonsai scissors Pinching and trimming shoots
Medium-grade akadama (14 L) The first repotting, mixed or on its own
Solid organic fertilizer Feeding the tree from spring to autumn

With this you can water well, feed, pinch and do the first repotting. The concave cutter can wait if you are not pruning branches yet.

About €150: kit for several trees

For anyone with two or three trees who wants to work on them properly.

What What for
205 mm concave cutter Pruning branches without stubs
Bonsai scissors Pinching and maintenance
Aluminium wire in several gauges Shaping branches
Wire cutters Removing wire without damaging the bark
Akadama, pumice and lava Custom mixes for each species
Set of sieves Removing dust from the soil
Fine-rose watering can Watering without washing the soil away

This is the kit most trees in a small collection are worked with.

€300 or more: a complete set

For anyone who is sure bonsai is here to stay.

What What for
Everything above The base
Root cutter Thick roots and branches when repotting
Tweezers with spatula and a root rake Clean repotting and fine work
Annealed copper wire Conifers
Turntable Working the tree from every angle
Training pots and one display pot Developing and presenting your trees

In what order to buy

  1. Soil and fertilizer: you need them from the first month.
  2. Scissors: you will use them every week in spring.
  3. Concave cutter: once you start pruning branches.
  4. Wire and wire cutters: once you start shaping.
  5. Everything else, as you find you need it.

Boxed kits: yes or no?

A basic four- or five-piece kit (concave cutter, scissors and, depending on the kit, knob cutter, wire cutters or rake) can cost less than buying the pieces separately and is a good way to start if the steel is decent. Very large, cheap kits usually contain tools that chip quickly. Before choosing, read the concave cutter guide, because it is the piece that matters most in any kit.

What you need

  • Dry akadama granules in a training pot with a pine
    Photo: Globalist1789 / Wikimedia Commons · Public domain
    Soil

    Hard-grade akadama · 2–5 mm

    The base of nearly all our mixes: it holds water without waterlogging and changes colour as it dries.

    Grain
    3–6 mm
    Mix
    50–70 % with pumice
  • Organic fertilizer pellets
    Photo: RolfSr / Wikimedia Commons · CC BY-SA 4.0
    Feeding

    Solid organic bonsai fertilizer

    It releases nutrients slowly with every watering, so it is hard to overdo. Ideal for beginners.

    Format
    Pellets
    Frequency
    Every 4–6 weeks
  • Bonsai tool roll with concave cutters, shears, tweezers and a rake
    Photo: Ragesoss / Wikimedia Commons · CC BY-SA 3.0
    Tools

    Carbon steel concave cutter · 205 mm

    Its curved blades cut the branch flush with the trunk. If you buy just one tool, make it this one.

    For
    Branches up to 12 mm
    Level
    All
  • Ginkgo trunk wired in a spiral
    Photo: Tangopaso / Wikimedia Commons · Public domain
    Wiring

    Anodized aluminium wire · several gauges

    Soft and easy to remove. A 1 to 4 mm set covers nearly every branch of a young tree.

    Gauges
    1 · 1.5 · 2 · 3 · 4 mm
    Use
    Deciduous and conifers