Skip to content
The Bonsai Art

Wiring · 7 materials

Wire types and how they differ

Wire holds a branch until the wood sets in its new shape. Materials differ in how much they hold for the same thickness, how easy they are to apply and how much harm they can do to the bark.

Comparison of wire types
TypeHolding powerEase of useKind to barkPriceRecommendation
Anodised aluminium3/55/54/5 € Best to start
Annealed copper5/52/53/5 €€€ For conifers
Raw copper5/51/52/5 €€ Avoid
Plain aluminium2/55/54/5 € Supplement
Iron or galvanised steel4/51/51/5 € Avoid
Raffia1/54/55/5 € Supplement
Guy wires4/54/54/5 € Supplement

Rule of thumb: aluminium wire should be a third of the branch thickness; copper needs only about two thirds of that gauge.

Wires

  • Best to start

    Anodised aluminium

    Aluminium with a matt brown or black finish that does not shine. Gauges from 1 to 6 mm.

    Holding power
    3/5
    Ease of use
    5/5
    Kind to bark
    4/5
    Price
    €

    Soft and easy to wrap, it can be repositioned without harming the branch and its colour goes unnoticed. It needs a thicker gauge than copper to hold the same.

    Use for: Deciduous trees, tropicals and any tree while you learn.

  • For conifers

    Annealed copper

    Copper heated to soften it; it hardens again as you bend it.

    Holding power
    5/5
    Ease of use
    2/5
    Kind to bark
    3/5
    Price
    €€€

    It goes on soft and hardens as you work it, so it holds a lot with a thin gauge and does not give. It is harder to handle and bites sooner if not watched. It darkens over time and becomes discreet.

    Use for: Pines, junipers and other conifers with springy branches.

  • Avoid

    Raw copper

    Electrical copper wire as sold.

    Holding power
    5/5
    Ease of use
    1/5
    Kind to bark
    2/5
    Price
    €€

    Too hard to wrap without damaging the bark. To use cable copper, anneal it first in a wood or charcoal fire.

    Use for: None as it comes.

  • Supplement

    Plain aluminium

    Silver aluminium craft or hardware wire.

    Holding power
    2/5
    Ease of use
    5/5
    Kind to bark
    4/5
    Price
    €

    It works like anodised wire, but it is very shiny and usually softer, so you need a thicker gauge. Fine for practice.

    Use for: Practice and developing trees.

  • Avoid

    Iron or galvanised steel

    Hardware wire for tying or fencing.

    Holding power
    4/5
    Ease of use
    1/5
    Kind to bark
    1/5
    Price
    €

    Very hard, it rusts and stains the bark, and it is easy to tear the branch when removing it. The saving is not worth it.

    Use for: Only for tying the tree into the pot when repotting, never on branches.

Wiring accessories

  • Supplement

    Raffia

    Plant fibre in strips, used damp.

    Holding power
    1/5
    Ease of use
    4/5
    Kind to bark
    5/5
    Price
    €

    Wrapped under the wire on thick branches before bending. It spreads the pressure, protects the bark and keeps it moist so the branch does not split.

    Use for: Strong bends in thick branches and trunks.

  • Supplement

    Guy wires

    Wire or cord anchored to the pot, trunk or another branch, with a pad where it touches the bark.

    Holding power
    4/5
    Ease of use
    4/5
    Kind to bark
    4/5
    Price
    €

    They lower or open branches without wrapping anything round them, so they do not scar. They are tightened gradually over weeks.

    Use for: Lowering thick branches and correcting angles.

Keep reading