Skip to content
The Bonsai Art

Tools · 18 types

Bonsai tool types and what each one is for

Every bonsai tool exists for a reason: cutting without leaving stubs, removing wire without harming the bark or loosening roots without tearing them. This is the full list, from the essentials to the specialist.

Bonsai tool types
TypeUsed forTypical sizeRecommendation
Concave cutter Cutting branches flush with the trunk 180–210 mm Essential
Knob cutter Hollowing out stubs and knots 180–210 mm Useful
Long-handled scissors Shoots and fine twigs 180–200 mm Essential
Fine-tip shoot scissors Leaves and buds 150–180 mm Useful
Branch scissors Branches of 3 to 8 mm 180–200 mm Useful
Root cutter Roots and thick branches 200–210 mm Useful
Pruning saw Branches and trunks over 15 mm 150–250 mm Advanced
Garden secateurs Shrubs and garden 200 mm Avoid
Wire cutters Cutting and removing wire 160–210 mm Essential
Jin pliers Bending, tightening and stripping 180–210 mm Useful
Branch benders and guy wires Bending thick branches Various Advanced
Root rake Loosening the root ball 180–210 mm Essential
Chopstick Settling soil and checking moisture 20–25 cm Essential
Tweezers with spatula Cleaning and moss 180–200 mm Useful
Sieves Removing dust and grading particles 3 meshes: 1.5 · 3 · 6 mm Essential
Drainage mesh Covering the pot’s holes 2–3 mm mesh Essential
Gouges and carving tools Jin, shari and hollows Various Advanced
Turntable Working from every angle 25–40 cm Useful

Cutting and pruning

  • Essential又枝切り

    Concave cutter

    Used for
    Cutting branches flush with the trunk
    Typical size
    180–210 mm

    Its curved blades cut a shallow bowl. As it heals, the wood grows in from the edges and the cut closes flat, without the bump ordinary scissors leave. It is the most important bonsai tool.

    Use for: Removing branches up to 10–12 mm without leaving a stub.

  • Usefulこぶ切り

    Knob cutter

    Used for
    Hollowing out stubs and knots
    Typical size
    180–210 mm

    Its blades are half-spheres that bite deep into the wood. It removes a stub or knot in several bites, leaving a hollow that heals sunken. It can do almost everything a concave cutter does, which is why some growers start with it.

    Use for: Removing old stubs, knots and cuts that healed with a bump.

  • Essential

    Long-handled scissors

    Used for
    Shoots and fine twigs
    Typical size
    180–200 mm

    Short blades and long, slim handles to reach inside a dense canopy without damaging neighbouring branches. The pair you use most in spring and summer.

    Use for: Pinching, trimming shoots and canopy maintenance.

  • Useful

    Fine-tip shoot scissors

    Used for
    Leaves and buds
    Typical size
    150–180 mm

    Smaller, with a very sharp tip, for precision work: defoliating, cutting a leaf stalk or selecting buds on pines.

    Use for: Defoliation, fine pinching and work on small trees.

  • Useful

    Branch scissors

    Used for
    Branches of 3 to 8 mm
    Typical size
    180–200 mm

    Thicker, shorter blades than shoot scissors, with more leverage. They cut branches that would damage fine scissors, before you tidy the cut with the concave cutter.

    Use for: Maintenance pruning of medium branches.

  • Useful

    Root cutter

    Used for
    Roots and thick branches
    Typical size
    200–210 mm

    Sturdy, with a tough edge, for cutting gritty roots without chipping the concave cutter, which grit ruins.

    Use for: Root pruning when repotting, and thick stumps.

  • Advanced

    Pruning saw

    Used for
    Branches and trunks over 15 mm
    Typical size
    150–250 mm

    A fine-toothed Japanese pull saw. For trunk reductions and thick branches before finishing with the knob cutter.

    Use for: Collected trees and heavy reductions.

  • Avoid

    Garden secateurs

    Used for
    Shrubs and garden
    Typical size
    200 mm

    They cut flat and crush one side of the branch. On a bonsai they leave stubs and bumps that take years to disappear.

    Use for: Only for roughing out nursery stock before real work.

Wiring

  • Essential

    Wire cutters

    Used for
    Cutting and removing wire
    Typical size
    160–210 mm

    Their short, rounded head cuts wire right against the bark without biting into it. Removing wire in pieces with them is the safe way to protect the branch.

    Use for: All wiring, aluminium or copper.

  • Useful

    Jin pliers

    Used for
    Bending, tightening and stripping
    Typical size
    180–210 mm

    Strong flat-nosed pliers. They give wire its final turn, tighten the tie-in wires when repotting and strip bark when making jin.

    Use for: Wiring thick branches and deadwood work.

  • Advanced

    Branch benders and guy wires

    Used for
    Bending thick branches
    Typical size
    Various

    Levers and screws that gradually bend branches too thick for wire. Guy wires (wire or cord anchored to the pot) lower branches without wrapping anything round them.

    Use for: Thick branches and trunks that cannot be wired.

Repotting and soil

  • Essential

    Root rake

    Used for
    Loosening the root ball
    Typical size
    180–210 mm

    With one, two or three prongs. It combs roots from the outside in without tearing them. Many have a spatula on the other end.

    Use for: Every repotting.

  • Essential

    Chopstick

    Used for
    Settling soil and checking moisture
    Typical size
    20–25 cm

    A plain wooden chopstick. Short jabs work soil in between the roots without compacting it, and pushed into the pot it tells you when to water.

    Use for: Repotting and watering.

  • Useful

    Tweezers with spatula

    Used for
    Cleaning and moss
    Typical size
    180–200 mm

    Long tweezers for removing dead leaves, old needles and insects; the spatula on the other end smooths the surface and places moss.

    Use for: Pine maintenance and finishing a repotting.

  • Essential

    Sieves

    Used for
    Removing dust and grading particles
    Typical size
    3 meshes: 1.5 · 3 · 6 mm

    A set with interchangeable meshes. They remove the dust that would clog the pot and separate fine from coarse particles so each goes where it belongs.

    Use for: Preparing soil before every repotting.

  • Essential

    Drainage mesh

    Used for
    Covering the pot’s holes
    Typical size
    2–3 mm mesh

    Plastic mesh cut into squares and held with a butterfly-shaped wire. It lets water out, keeps soil in and stops insects getting in from below.

    Use for: Every pot, at every repotting.

Deadwood and the workbench

  • Advanced

    Gouges and carving tools

    Used for
    Jin, shari and hollows
    Typical size
    Various

    Hand gouges, knives and rotary burrs to texture deadwood so it looks natural. A brass brush finishes the job before applying lime sulphur.

    Use for: Junipers, olives and collected trees.

  • Useful

    Turntable

    Used for
    Working from every angle
    Typical size
    25–40 cm

    It turns the tree without touching it. It seems a luxury until you use one: you see every side while pruning or wiring and work at eye level.

    Use for: Long pruning and wiring sessions.

Keep reading